Draytek Vigor3300 Series Manual de usuario descargar pdf (Pagina 74)

2.5.3 ntp

This command can set Network Time Protocol (NTP) client and the router can get standard

time from the time server.

ntp -s

ntp <Disable>

ntp <Enable> <NTP Server IP><Daylight savings time> <Update Interval><area>

Syntax Description

-s It is used for displaying current settings.

Disable Enter “0” to use the browser time from the remote administrator

PC host as router’s system time.

Enable Enter “1” to use the time from an NTP server as router’s system

time.

NTP Server IP Enter a public IP address or domain name of the NTP server.

Daylight savings time Enter “0” to close the daylight saving time. Or enter “1” to

activate daylight saving time. This function is useful for some

areas only.

Update Interval Enter a time interval with number of 30/60/300/600 for updating

from the NTP server.

30 : 30 seconds ;

60 : 1 minute:

300 : 5 minutes;

600 : 10 minutes

area Enter the number (0 – 72) to specify the time zone for different

areas.

Example

DrayTek/system> ntp -s

Status: Disable

NTP Server IP:

Daylight savings time: 0

Update Interval: 3030 Seconds

area: 22 (refer to manual)

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 122 123

Sin comentarios

Draytek Vigor3300 Series Manual de usuario Pagina 74