Draytek Vigor3300 Series Manual de usuario descargar pdf (Pagina 67)

Example

DrayTek/qos/incoming> class -e 1 discussion 15

DrayTek/qos/incoming> class -s 1

Index: 1

Class Name: discussion

Bandwidth: 15

2.4.4.3 filter

This command can set incoming filter table for QoS function.

Filter -s <Index>

Filter -e <Index> <SrcAddr> <SrcMask> <DstAddr><DstMask> <STStatus>

Filter -d <Index>

Syntax Description

-s It is used for displaying current settings.

-e It is used for editing the settings of specified item.

-d It is used for deleting the settings of specified item.

Index Enter the number (from 1 to 10) of incoming class that you want

to set for specific configuration.

SrcAddr Enter the source IP address to be applied for this filter.

SrcMask Enter the subnet mask value (/24 ; /16 ; /8 ; /25 ; /26 ; /27 /28 ;

/29 ; /30 ; /31 ; /32) for the source IP address to be applied for this

filter.

DstAddr Enter the destination IP address to be applied for this filter.

DstMask Enter the subnet mask value (/24 ; /16 ; /8 ; /25 ; /26 ; /27 /28 ;

/29 ; /30 ; /31 ; /32) for the destination IP address to be applied for

this filter.

STStatus It is used for specifying if service type, protocol will be

configured. Ener the number (0,1 or 2) to specify service type

status.

0: Basic (Only the Service Type field is allowed to be

configured.);

1: Advanced (The Protocol and Port fields are allowed to be

configured.);

2: None (No field is allowed to be configured.)

ServiceType There are thirty-five service types provided here. The available

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 122 123

Sin comentarios

Draytek Vigor3300 Series Manual de usuario Pagina 67