Draytek Vigor3300 Series Manual de usuario descargar pdf (Pagina 15)

2.1.1.4 redirectport

The full name of this command is – redirect port function. This command can expose internal

servers to the public domain or open a specific port to internal hosts.

redirectport -s <Index>

redirectport -mtom <Index> <Protocol><Public Port Start> <Public Port End>

<Private IP><Private Port Start> <Private Port End> <Use IP Alias

Off> <WAN Interface>

redirectport -mtom <Index> <Protocol><Public Port Start> <Public Port End>

<Private IP><Private Port Start> <Private Port End><Use IP Alias

On> <IP Alias>

redirectport -mto1 <Index> <Protocol><Public Port Start> <Public Port End>

redirectport -mto1 <Index> <Protocol><Public Port Start> <Public Port End>

redirectport -1to1 <Index> <Protocol> <Public Port Start><Private IP>

redirectport -1to1 <Index> <Protocol><Public Port Start><Private IP>

redirectport -m <Index> <Protocol><Public Port Start> <Public Port End>

redirectport -m <Index> <Protocol>

Syntax Description

-s It is used for displaying the settings of specified item.

-mtom It means to redirect multiple ports for public IP to multiple ports

of certain IP address.

-mto1 It means to redirect multiple ports for public IP to certain port of

specific IP address.

-1to1 It means to redirect one port for public IP to one port of certain IP

address.

-m It means to redirect one port for public IP to certain IP address.

Index Enter the number of the item for the setting you want to execute

specific action.

Protocol Available settings that you can use include 0 (means TCP) and

1(means UDP).

Public Port Start The available range is from 1 to 65535.

Public Port End The available range is from 1 to 65535.

Private IP Specifgy the IP address for mapped by the public port(s).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 122 123

Sin comentarios

Draytek Vigor3300 Series Manual de usuario Pagina 15