Draytek Vigor3300 Series Manual de usuario descargar pdf (Pagina 49)

2.3.2 wan

2.3.2.1 advance

This command can set load balance, enables or disables backup function for WAN interface

and sets the weight load (10-90%) for WAN interfaces.

backup -s

backup <status>

loadbalance -s

loadbalance <status> <autoweight>

loadbalance -cache <cache mode>

weight -s

weight <WAN1> <WAN2> <WAN3> <WAN4>

Syntax Description

-s It is used for displaying current settings.

backup It is used for setting WAN backup configuration.

loadbalance It is used for setting WAN load balance configuration.

weight It is used for weighting configuration of WAN load balance.

staus 0: Disable

1: Enable

autowight The system will distribute data in and out of the Internet

automatically. Enter the number to enable or disable this function.

0: Disable

1: Enable

-cache It is used for cache algorithm.

cache mode 0: Cache by source and destination IP

1: Cache by source IP only

WAN1 – WAN4 Enter the number (representing different percentage) for each

WAN interface respectively.

1: 10%, 2: 20%, 3: 30%, 4: 40%, 5: 50%, 6: 60%, 7: 70%, 8: 80%,

9: 90%

Example

DrayTek/network/wan/advance> loadbalance -cache 1

After reboot, changes will take effect. Reboot now? (y/n)y

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 122 123

Sin comentarios

Draytek Vigor3300 Series Manual de usuario Pagina 49