Draytek Vigor3300 Series Manual de usuario descargar pdf (Pagina 26)

2.1.9 tagvlan

The full name of this command is - Tag VLAN Setting. This command can set VLAN based on

802.1Q.

tagvlan -s

tagvlan <Mode>

tagvlan -p <Port_Index> <VLAN_ID>

tagvlan -g <Group_Index> <Enable> <Name> <VLAN_ID><P1> <P2> <P3> <P4>

<P1_Tag> <P2_Tag><P3_Tag> <P4_Tag>

tagvlan -d <Group_Index>

Syntax Description

-s It is used for displaying the Tag VLAN settings.

-d It is used for deleting the specified group.

Mode Enter “1” to enable the Tag VLAN setting.

Enter “0” to disable the Tag VLAN setting.

Enable Enter “1” to enable this group setting.

Enter “0” to disable this group setting.

-p It means to set port setting.

-g It means to set group setting.

Port_Index Enter the number of the port (from 1 to 4) that you want to

execute specific action.

VLAN_ID Enter a number used for identification on VLAN for your

computer. The available range is from 1 to 4094, except 10,11,12

and 13.

Group_Index Enter the number of the group (from 1 to 4) that you want to

execute specific action.

Name Specify the name for the four groups of VLAN.

<P1>,<P2>,<P3>,<P4> Enter “0” to represent “Not a Member”.

Enter “1” to represent “Group Member”.

<P1_Tag>,<P2_Tag>

<P3_Tag>,<P4_Tag>

“0” means Frame Unmodified.

“1” means Frame Untagged.

”2” means Frame Tagged.

Type the number for each setting respectively.

Example

DrayTek/advance> tagvlan -g 1 1 VLAN5 5 1 0 0 0 1 2 2 0

After reboot, changes will take effect. Reboot now? (y/n) y

Draytek login: draytek

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 122 123

Sin comentarios

Draytek Vigor3300 Series Manual de usuario Pagina 26