Draytek Vigor 2200V Guía de instalación descargar pdf (Pagina 94)

5-11

Advanced Setup

For LAN1:

Click “LAN1 TCP/IP and DHCP Setup” to configure your LAN1 inter-

face for IP routing.

Check “Enable” and assign 192.168.100.1 in the 2nd IP Address

field, 255.255.255.0 in the 2nd Subnet Mask field. You now have a

routeable network 192.168.100.0/24 connected on the LAN1 inter-

face.

For LAN2(WAN):

To configure the LAN2(WAN), on the Main Setup Menu click “Internet

Access Setup” > “Static or Dynamic IP” to enter the setup page.

Note that Broadband Access is enabled and we assigned LAN2(WAN)

a static IP, 192.168.200.1, with a subnet mask of 255.255.255.0, and

a default gateway of 192.168.200.254. The default gateway is a next

hop router connected to another IP network, 192.168.201.0/24. In

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 139 140

Sin comentarios

Draytek Vigor 2200V Guía de instalación Pagina 94