Draytek Vigor 130 Guía de usuario descargar pdf (Pagina 175)

Vigor2760 Series User’s Guide

165

Available settings are explained as follows:

Item Description

Enable the QoS Control

The factory default for this setting is checked.

Please also define which traffic the QoS Control settings

will apply to.

IN- apply to incoming traffic only.

OUT-apply to outgoing traffic only.

BOTH- apply to both incoming and outgoing traffic.

Check this box and click OK, then click Setup link again.

You will see the Online Statistics link appearing on this

page.

WAN Inbound

Bandwidth

It allows you to set the connecting rate of data input for

WAN2/WAN3. For example, if your ADSL supports 1M of

downstream and 256K upstream, please set 1000kbps for

this box. The default value is 10000kbps.

WAN Outbound

Bandwidth

It allows you to set the connecting rate of data output for

WAN2/WAN3. For example, if your ADSL supports 1M of

downstream and 256K upstream, please set 256kbps for this

box. The default value is 10000kbps.

Reserved Bandwidth

Ratio

It is reserved for the group index in the form of ratio of

reserved bandwidth to upstream speed and reserved

bandwidth to downstream speed.

Enable UDP Bandwidth

Control

Check this and set the limited bandwidth ratio on the right

field. This is a protection of TCP application traffic since

UDP application traffic such as streaming video will

exhaust lots of bandwidth.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 354 355

Sin comentarios

Draytek Vigor 130 Guía de usuario Pagina 175