Draytek SmartMonitor Manual de usuario Pagina 2

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 1
The two USB ports can be used for the connection of 3G/4G mobile broadband dongle, FTP drive and network printers.
A 3G/4G mobile broadband connected to one of the 2 USB ports can be used as a second WAN for bandwidth
management. *If your area does not have VDSL or ADSL access, you can have 2 USB 3G/4G dongles connected to
the USB ports, and assign one of these (WAN 3) to be the primary access and the other (WAN 4) as the fail-over back-
up. And, you have the flexibility to convert back to DSL services when these become available.
Like all DrayTek routers, Vigor2860 supports Object-based SPI firewall and CSM (Content Security Management). The
firewall allows setting of Call/Data Filters and DoS/DDoS prevention, whereas the CSM covers IM/P2P/Protocol filter,
URL Content Filter and Web Content Filter.
With Objects settings, you can pre-define objects or groups for IP, service type, keyword, file extension, etc., and mix
these with the Time Scheduler or the VLAN groups as required. Altogether this gives you peace of mind whether you
are guarding a complicated network or a small office.
Up to 32 VPN tunnels are supported, each can be set to IPsec/PPTP/L2TP/L2TP over IPsec protocols, with hardware
encryption of AES/DES/3DES. This level of VPN capability covers the requirements of most businesses for secure
inter-office and remote data accessing.
Vigor2860
Series
2 USB ports for 3G/4G mobile, FTP drive and network printers
Vigor2860 Series WAN/LAN interface
6-port Gigabit Ethernet LAN
3G/4G USB modem
I &
Pv6 Pv4
I
WAN 1(VDSL2)
VDSL2 (Up to 200Mbps)
(with ADSL fallback)
WAN 2(Gigabit Ethernet)
xDSL2/Cable/FTTH modem & any
extreme fast Ethernet Internet feed
Object-based SPI Firewall for network security
32 VPN tunnels; hardware based with comprehensive secure protocols
Vigor2860 Series
Main office
VPN Tunnel
VPN-2
VPN-1
Secured networking
Remote office
Vigor2860 Series
The VLAN functions allow multi-subnets to be allocated for multiple workgroups. When combined with the NAT and
firewall functions, you can design corporate network groups in terms of traffic, security level, priority settings, etc.
Applications such as VoIP, IPTV and Wireless SSID can also be integrated into VLAN tags and firewall objects, giving
you the maximum flexibility in designing workgroups for your organization.
VLAN for secure and efficient workgroup management
Vigor2860 is equipped with 6 x Gigabit LAN ports, enough to cover high traffic needs of modern day unified
communication applications, such as CRM server, FTP server, Mail server, and so on.
Vigor2860n and Vigor2860Vn each have a built-in IEEE 802.11n WLAN Access Point with features to support
requirements for speed, security and functions of businesses and enterprises. Conforming to high speed of 802.11n
specifications, they also cover all major security and encryption protocols, including WEP/WPA/WPA2, MAC Address
Control, 4 x SSID, Wireless LAN Isolation, Wireless VLAN* and 802.1x Authentication.
The Wireless Rate Control function allows connection rates for each network device to be individually managed as
required. The WMM (Wi-Fi Multi-Media)* function allows setting of priority levels for various applications: voice, video,
data, etc., so time-critical applications can be assigned higher priority levels. Furthermore, WDS (Wireless Distribution
System) function allows you to extend the wireless coverage distance easily.
In line with the concept of Internet covering all aspect of communication requirements, Vigor2860Vn has 2 FXS ports
and a Line port, and supports many supplemental services . You can connect 2 analogue telephones to the 2 FXS ports,
and the PSTN line to the Line port. Vigor2860Vn supports 12 SIP (Session Initiation Protocol) registrations through
Internet or with the traditional PSTN line (for instance, in case of an electricity blackout and subsequent loss of power to
the router itself).
VigorSwitch
G2260
Vigor2860 Series
VLAN 0
HR Dept.
VLAN 1
Finance Dept.
VLAN 2
Sales Dept.
VLAN 3
R&D Dept.
QoS
SSID 1
SSID 2
Lowest
Low
Highest
High
Subnet
LAN 1
LAN 2
LAN 3
LAN 4
Firmware Upgradeable
6 x Gigabit LAN ports
Enterprise class IEEE 802.11n WLAN AP
Cost-effective VoIP feature
Supports SmartMonitor traffic report software
Vigor2860 series routers support SmartMonitor,
DrayTek's proprietary network traffic reporting software,
for up to 30 users. This software monitors all incoming
and outgoing network traffic, categorizes these into
various activity and data types and provides statistics in
various report types, so network administrators can
monitor network activities for planning and/or fault
locating purposes.
Timeline of employee’s every network activity
Vigor2860
Series
Working with Smart Monitor Traffic Analyzer
Like all DrayTek routers, Vigor2860 series routers support comprehensive network management functions. For example,
you can set username/password and directory/file access privilege for individual users as required. There are also
routing/network tables, system log, debugging utilities, etc., making network administrators' jobs easy.
Other management features include SNMP, TR-069 and TR-104. TR-069 can be utilized with DrayTek's VigorACS-SI
management software to remotely monitor and manage the Vigor2860.
Firmware upgrades are easily carried out using the Vigor2860 web GUI or by using TFTP, FTP or via TR-069 using
VigorACS-SI.
Flexible Network Management
Vista de pagina 1
1 2

Comentarios a estos manuales

Sin comentarios