Draytek Vigor 2130 Guía de usuario descargar pdf (Pagina 175)

Vigor2130 Series User’s Guide

167

Enable the necessary VPN service as you need. If you intend to run a VPN server inside your

LAN, you should enable IPSec VPN Pass-through and specify an IP address to allow VPN

tunnel pass through.

Enable IPSec VPN Service

If this checkbox is checked, the system firewall will allow

VPN (IPSec) remote access from WAN side to the router.

Enable IPSec VPN

Pass-through (Server inside

your LAN)

If this checkbox is checked, the system firewall will allow

VPN (IPSec) remote access from WAN side to a VPN

device on the LAN. Type the IP address of the VPN

device in the field next to the checkbox.

Enable PPTP VPN Service

If this checkbox is checked, the system firewall will allow

VPN (PPTP) remote access from WAN side to the router.

IP Address range for PPTP client – Specify an IP

address pool for the local private network that will be

assigned to PPTP clients. Note the values given here

should not be the same as IP address range for DHCP

Client.

IP Address range for DHCP client – Display the range

of IP address assigned by DHCP server.

Enable PPTP VPN

Pass-through (Server inside

your LAN)

If this checkbox is checked, the system firewall will pass

VPN (PPTP) remote access from WAN side to a VPN

server in the LAN. Type the IP address of the VPN server

in the field next to the checkbox.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 240 241

Sin comentarios

Draytek Vigor 2130 Guía de usuario Pagina 175