Draytek Vigor VigorAccess IVD Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 37
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Version: 1.0
Quick Start Guide for VigorAccess
13
S How to Change VPI/VCI for Existing VCC
Users can use the following command to change VPI/VCI for existing VCC. The commands are listed as
below. We strongly recommend to delete original VCC, then re-create a new VCC with new values.
Command Description
$pvc delete <dsl: 1~24> <pvc: 1~8>
$pvc create <dsl: 1~24> <pvc: 1~8> <vpi>
<vci> [<llcmux|vcmux>]
[<interleaved|fast>]
S How to Change Management IP Address for Existing Ethernet Port
Users can use the following command to change management IP address for existing uplink Ethernet port.
The commands are listed as below.
Command Description
$ipconfig <ip> <mask>
S How to Create more VC/EOA/Bridge
Users can use the following command to create more VC/EOA/Bridge. The commands are listed as
below.
Command Description
$create atm vc intf ifname aal5-* vpi
<vpi> vci <vci> lowif atm-*
[vcmux/llcmux] [fast/interleaved]
(*:0 ~ 23 is used for atm; 0~191 is used for aal5)
$create eoa intf ifname eoa-* lowif
aal5-*
(*:0~191 is used for aal5 and eoa)
$create bridge port intf portid
<bridge-port-id> ifname eoa-*
(*:0~191 is used for eoa,; 1~192 is used for
<bridge-port-id>)
S How to Setup SNMP Community/Host/Trap
Users can use the following command to setup SNMP community/host/trap. The commands are listed as
below.
Command Description
$snmpconfig <ro community> <rw
community> <trap community> <host ip>
Create SNMP community and host to manage the
device through SNMP
S How to Create VLAN
Users can use the following command to create VLAN. The commands are listed as below.
Command Description
$create vlan static vlanname
<vlan-name> valnid <vlan-id>
[egressports <bridge ports>]
Create VLAN
(vlan-id is from 1~4094)
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 36 37

Comentarios a estos manuales

Sin comentarios